Keribao (Chongqing) Machinery Technology Co., Ltd.
Address: 55-2, taojialongding enterprise center, Jiulongpo District, Chongqing
1. The refrigeration unit can be selected to keep the temperature of the liquid supply stable.
2. The floor area is very small. The plate-frame oil filter saves more floor area than the gravity flat screen filter with the same flow rate.
3. The utilization rate of consumables is very high. The pumping of water pump increases the speed of liquid passage, which is more economical than the filter paper of gravity flat screen filter with the same flow rate.
4. It can supply liquid continuously for a long time without any person on duty. It can automatically control by PLC and alarm the malfunction automatically.
5. The magnetic separator can be added to the plate-frame oil filter to remove the impurities in the first stage, so as to reduce the consumption of filter paper.
6. The filtering accuracy is very high. The plate-frame oil filter uses the cake formed by the accumulation of impurities as the precise filter layer, which greatly improves the filtering accuracy.
7. Turn off the heater and stop the oil pump before shutting down the oil filter. Close the inlet and outlet valves. Close the vacuum valve when the pressure vacuum gauge reaches the working vacuum. Then stop the vacuum pump. The cooling pump discharges the oil from the condenser and closes the other valves. Cut off the total power supply. If the ambient temperature is below 0 C or more than one month after shutdown, the water tank should be drained to store water.
8. The vacuum pump oil must be heated to about 15 before starting when it is used in an environment with temperature below 15 C.
9. If the purified oil is too dirty, appropriate measures should be taken to treat it before purification, otherwise the service life of the machine will be affected.
10. If the inside of the oil filter is too dirty or the use time is too long, when the inside needs to be cleaned, the outlet valve can be closed, the bypass valve can be opened, and the internal circulation cleaning can be carried out according to the start-up procedure. After cleaning, the oil is discharged and the filter paper is replaced before and after cleaning the metal mesh of the primary filter.